Detachable Wall Mount for Milwaukee M12/M18 Charger 48-59-1812/48-59-1808 Rapid
Specifications
| All Returns Accepted | ReturnsNotAccepted |
| Brand | Milwaukee |
| Voltage | 18 V |
| Color | Black |
| Model | 48-59-1812/48-59-1808 |
| Country/Region Of Manufacture | United States |
Usually the battery's come to the charger but sometimes the charger needs to come to the batteries! Quickly detach your charger for the wall using the locking tab or securely hold it on the wall using this 2 pcs mount. Features: - Hardware included - 4x T10 Screws *Optional T-10 Torx bit* Screw used to secure charger plate to charger - Quick detach tab allows for easy removal when pressed - Built in silicone feet makes charger stick to table top when not mounted - Custom designed and manufactured by myself, 3D printed in the USA. -Made with PETG filament which when compared to the commonly used PLA, offers improved strength and also high heat resistance (PLA has a poor resistance to heat and can cause deformation over time). Instructions: 1. Flip Rapid charger upside down. 2. Use T10 bit to remove 4 corner screws (Do not remove 5th center screw) 3. Place charger plate into slots on backside of charger. Push up until it snaps into place. Will hear audible click. *WARNING* Do not overtighten provided screws. 4. Secure plate to charger with provided screws. Tighten screw until head contacts plate or until snug. 5. Mount wall plate to wall using at minimum 2 center screw holes. 6. Mount charger to wall plate. 7. Push quick detach tab to the left and slide charger up to detach. Charger NOT included.
